Parameters of TOSHIBA KSG60ZSE256G SATA 256GB with Firmware ABDA4102
General information | |
---|---|
Trademark | Toshiba |
Model | TOSHIBA KSG60ZSE256G SATA 256GB |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.3 |
Form-factor | 2.5" |
Firmware | ABDA4102 |
Firmware upgrade | supported |
SSD controller | Marvell |
ATA version | ACS-4 |
Advanced Format | supported |
Units tested | 1 |
Times tested | 1 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 360 MB/s |
Minimum average access time | 0.17 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | not supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 23 |
SCT Transport | supported |
Duration of full self test | 11 minutes |
Critical maximum temperature | 80°C (176°F) |
Recommended maximum temperature | 40°C (104°F) |
Maximum temperature | 51°C (123°F) |
Average maximum temperature | 51°C (123°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |