Parameters of TOSHIBA MG09ACA18TE with Firmware 0104
| General information | |
|---|---|
| Trademark | Toshiba |
| Model | TOSHIBA MG09ACA18TE |
| Capacity | 16.3 TB |
| Interface | SATA |
| SATA version | 3.3 |
| Form-factor | 3.5" |
| Firmware | 0104 |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | ACS-4 |
| Advanced Format | supported |
| Units tested | 9 |
| Times tested | 11 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 390 MB/s |
| Maximum read speed | 287 MB/s |
| Minimum average access time | 11.79 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 29 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 55°C (131°F) |
| Average maximum temperature | 47°C (116°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 1528 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |