Parameters of TOSHIBA MQ01ABD100M with Firmware AX1A1V
| General information | |
|---|---|
| Trademark | Toshiba |
| Model | TOSHIBA MQ01ABD100M |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | AX1A1V |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 2 |
| Times tested | 4 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 215 MB/s |
| Maximum read speed | 33 MB/s |
| Minimum average access time | 18.1 msec |
| Cache buffer | 16 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 24 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 239 minutes |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 72°C (161°F) |
| Average maximum temperature | 57°C (134°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 222 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |