Parameters of TOSHIBA THNSNJ128G8NY with Firmware JYFA0101
| General information | |
|---|---|
| Trademark | Toshiba |
| Model | TOSHIBA THNSNJ128G8NY |
| Capacity | 128 GB (119.2 GiB) |
| Form-factor | < 1.8" |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | Marvell |
| Firmware | JYFA0101 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 328 MiB/s |
| Minimum average access time | 0.18 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 24 |
| SMART command transport (SCT) | supported |
| Full self-test time | 5 minutes |
| Critical maximum temperature | 80°C (176°F) |
| Recommended maximum temperature | 40°C (104°F) |
| Maximum temperature | 58°C (136°F) |
| Average maximum temperature | 58°C (136°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |