Parameters of TOSHIBA THNSNJ256G8NY with Firmware JYXA0101
General information | |
---|---|
Trademark | Toshiba |
Model | TOSHIBA THNSNJ256G8NY |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | < 1.8" |
Firmware | JYXA0101 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
SSD controller | JMicron61x |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 8 |
Times tested | 15 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 394 MB/s |
Maximum read speed | 359 MB/s |
Minimum average access time | 0.14 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 19 |
SMART Command Transport (SCT) | supported |
Duration of full self test | 10 minutes |
Critical maximum temperature | 80°C (176°F) |
Recommended maximum temperature | 40°C (104°F) |
Maximum temperature | 87°C (188°F) |
Average maximum temperature | 78°C (172°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |