Parameters of TOSHIBA THNSNK128GVN8 with Firmware K8TA4102
| General information | |
|---|---|
| Trademark | Toshiba |
| Model | TOSHIBA THNSNK128GVN8 |
| Capacity | 119.2 GB |
| Interface | SATA |
| SATA version | 3.2 |
| Form-factor | M.2 |
| Firmware | K8TA4102 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | JMicron61x |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 2 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 308 MB/s |
| Maximum read speed | 263 MB/s |
| Minimum average access time | 0.17 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 24 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 6 minutes |
| Critical maximum temperature | 80°C (176°F) |
| Recommended maximum temperature | 40°C (104°F) |
| Maximum temperature | 67°C (152°F) |
| Average maximum temperature | 67°C (152°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |