Parameters of VK0480GECQP with Firmware HPG3
| General information | |
|---|---|
| Trademark | Hewlett Packard |
| Model | VK0480GECQP |
| Capacity | 480.1 GB (447.1 GiB) |
| Form-factor | 2.5" |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | Samsung |
| Firmware | HPG3 |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 442 MiB/s |
| Minimum average access time | 0.12 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 9 |
| SMART command transport (SCT) | supported |
| Full self-test time | 35 minutes |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 37°C (98°F) |
| Average maximum temperature | 37°C (98°F) |
| Security | |
| Drive access restriction | not supported |
| Enhanced security erase | not supported |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |