Parameters of WDC WD10EZEX-08WN4A0 with Firmware 05.00H.1
| General information | |
|---|---|
| Trademark | Western digital |
| Model | WDC WD10EZEX-08WN4A0 |
| Capacity | 1 TB (931.7 GiB) |
| Form-factor | 3.5" |
| Type | HDD |
| Interface | SATA |
| Firmware | 05.00H.1 |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 232 MiB/s |
| Maximum read speed | 172 MiB/s |
| Minimum average access time | 23.33 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | not supported |
| Advanced power management (APM) | not supported |
| Acoustic management (AAM) | supported |
| Clearing unused data (TRIM) | not supported |
| Reliability | |
| Count of sensors | 22 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 122 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 40°C (104°F) |
| Average maximum temperature | 40°C (104°F) |
| Security | |
| Drive access restriction | not supported |
| Enhanced security erase | not supported |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |