Parameters of SSD Smartbuy 120GB with Firmware SAFM02.2
General information | |
---|---|
Trademark | Smartbuy |
Model | SSD Smartbuy 120GB |
Capacity | 111.7 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | 2.5" |
Firmware | SAFM02.2 |
Alternative firmwares | 34 |
Firmware upgrade | supported |
SSD controller | Phison |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 3 |
Times tested | 3 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 401 MB/s |
Maximum read speed | 388 MB/s |
Minimum average access time | 0.7 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 11 |
SCT Transport | not supported |
Duration of full self test | 2 minutes |
Maximum temperature | 53°C (127°F) |
Average maximum temperature | 52°C (125°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |